Like Us on Facebook!Email Us!Over 40 years of racing experience including multiple championships and records
All products listed here

LOWE Fuel Systems - Flowed Systems and Hardware
Fuel Systems

Drag Race School - Live your Dreams

Products Page
Services Page

Front Page
Contact us
New Products

Sales Form
Parts Listing
Literature Listing

Race Car Chassis and Hardware

Raceglass Composites
Bodies, scoops, seats and noses

Drives, hardware
and accessories

Chassis Components
Tabs, brackets
and hardware

Engine Components
Crank supports
Offset mag drives
Timing covers
and hardware

Fittings and hardware

Hardware and brackets

Motion Controls
Pedals, levers, cables and hardware

Shifters and controls

and hardware

Race Tools
Custom designed tools for race cars

Front wheels

and Hardware

and altered

Switches and connections

Mounting and hardware

Body Hardware
Dzus fasteners and hardware

Bottle clamps and chassis clamps

Pumps and radiators

Diff Housings
and hardware

Couplers &
and hardware

Gauges and mounting

Safety Equipment
and belts

Fuel Injection
Hardware and information

and Accessories

Dragster bodies
and Features

Photo Galleries
Customers Cars
Nostalgia Tour

Harbinger Press

Ideas and Opinions

World Drag Racing Championships

Racing Links
Connections to the web

New Products
Hot off the drawing board

Parts for sale
New and used

and fliers



Thanks to:
People who impacted Ken Lowe

Racer Diary
Ken Lowe

Video Archive
Drag Race Video's

Sales Terms and Conditions


wpe50.jpg (3740 bytes)
Body Mounting Hardware
NEW - VISIT our Alpha INDEX Page
All of our Products, Services and Information listed alphabetically
Click Here
HOME - Email to KLRC

It is recommended to use the flat head (countersunk) fasteners on aluminum panels and use the domed head fasteners on fiberglass panels or use the self ejecting countersunk fasteners on fiberglass because they have a steel plate that holds the hardware to the fiberglass and acts as a load bearing surface for the fastener to apply pressure against.

The large Dzus fasteners both domed and flat head use a 1.375" center to center spring and mounting hardware. The small fasteners use a 1" center to center spring mount.

Large flat head Dzus hardware (1.375"c-c mount)
Flat head dzus buttons.jpg (1742 bytes)
Large flat head Dzus fastener steel ............... pn 58135-11550
Large flat head Dzus fastener aluminum ........ pn 58135-10550
Self ejecting dzus buttons.jpg (1881 bytes) Dzus fastener (Large self ejecting) ...... pn 58135-51000
Large dzus spring.jpg (1501 bytes) Large Dzus spring 1.375" ...... pn 58680-10100
Extra light dzus tab.jpg (1956 bytes) Large Dzus mounting bracket (extra light weight) ...... pn 58555-11000
Light dzus tab.jpg (1980 bytes) Large Dzus mounting bracket (light weight) ........ pn 58555-12000
Standard dzus tab.jpg (1928 bytes) Large Dzus mounting bracket (standard) ......... pn 58555-13000
Dual dzus tab.jpg (2325 bytes) Dzus mounting steel bracket (dual) can be used for mounting the cover over the bellhousing on a funny car or altered by bolting this bracket to the engine plate. pn 58555-73061
Non dimpled dual dzus tab.jpg (2909 bytes) Non dimpled shown
Dzus mounting bracket (dual) if dimpled to be used where two top panels come together on the top chassis rail of a dragster.
    Non dimpled pn 58555-73861    (full fiberglass panels)
    Full dimpled pn 58555-73861     (full aluminum panels)
    Left dimpled pn 58555-73861     (one side where alum and fiberglass panels meet)
    Right dimpled pn 58555-73861     (one side where alum and fiberglass panels meet)

Dimpled dual dzus tab.jpg (3364 bytes)
Funny Car/Altered bellhousing cover mount plate (attaches to engine plate with 3/16" screws) .. pn58555-73061

Panel doubler.jpg (2049 bytes)Panel doubler for flat head Dzus buttons. Reinforces thin aluminum body panels on dragsters, altereds and funny cars. Recommended for use in supercharged applications or where car will get a lot of use. Use aircraft rivets to install to body panel.
Panel doubler for flat head Dzus 58555-19000
Panel doubler for domed head Dzus 58555-29000

Large domed head Dzus hardware (1.375"c-c mount)
Domed head Dzus is best used for mounting fiberglass or carbon panels and hardware.
Domed dzus buttons.jpg (1829 bytes)
Large domed head Dzus fastener steel ............... pn 58135-13550
Large domed head Dzus fastener aluminum ........ pn 58135-12550
Large dzus spring.jpg (1501 bytes) Large Dzus spring 1.375" ...... pn 58680-10100
Standard domed head tab.jpg (2057 bytes) Large domed head Dzus single mount bracket ... pn 58555-13000
Dual domed head tab.jpg (5794 bytes)
Large domed head Dzus dual mount bracket .. pn 61735-86012
    Good for mounting overflow tanks on funnycars, altereds and dragsters.
    Companion aluminum bracket for side of tank is available as well. pn 61735-86023
"Puke" tank on altered or funny car.jpg (5729 bytes) wpe71.jpg (7687 bytes)
Use standard (large) Dzus and springs (1.375"c-c) to connect the steel chassis bracket to aluminum tank bracket.

Dashboard cover mounting hardware (large domed Dzus fasteners)
Dashboard cover.jpg (6171 bytes)wpe48.jpg (7188 bytes)
Dashboard cover hides all the unsightly wires and the back of the switches yet offers easy access to the back of the panel for maintenance. For dashboard covers click here
Dashboard cover mount tabs.jpg (3923 bytes) Anodizing optional
Dzus dual mount bracket only - aluminum (use dome head Dzus) ... pn 48385-24521
Dashboard cover mount kit.jpg (6557 bytes)
Dzus dual mount bracket kit. Comes complete with brackets, Dzus, springs, bolts, nuts and pop rivets ... pn 48385-24529
Small Dzus hardware (1" center to center mount)
Small self ejectin dzus button kit.jpg (18363 bytes) Small Dzus hardware (1" c-c spring)
Small self ejecting non wing button.jpg (1829 bytes) Small self ejecting Dzus button - non wing ....  pn 58135-4000
Small self ejectin wing button.jpg (1590 bytes) Small self ejecting Dzus button - wing ..... pn 58135-41000
Small dzus button spring.jpg (1879 bytes) Small Dzus spring ....... pn 58555-45000
Small dzus button tab.jpg (3234 bytes) Small Dzus mounting plate ........ pn 58680-47000

Dragster windscreen.jpg (30967 bytes)
Dragster windscreen polycarbonate material pn  58795-00001

Body mount hinge hardware
Altered rear body mount.jpg (7161 bytes)
Funny car body hinge ......... pn 58305-73206

Altered rear body mount kit.jpg (6420 bytes) wpe6E.jpg (6818 bytes)
Altered body hinge ................................... pn 58305-73186
Altered body hinge mounting brackets ...... pn 58305-73193
See below for more details on this hinge assembly
Body latch hardware

Funny car mount latch and handle.jpg (14669 bytes) wpe47.jpg (17081 bytes)
Body latch hardware for front of funny car bodies.
Latch to clip to 1"chrom-moly tube ... pn
Handle to provide connection to latch.... pn

Cover latch for Funny Car escape hatch.jpg (5124 bytes) Cover latch pn 58355-00100
Computer & battery access panel door assembly

Access door installation.jpg (7647 bytes)Access door kit.jpg (9913 bytes)
Dragster panel access door assembly  Door is 5" x 6" / Door frame is 7" x 8"
    with flat head (non wing) self ejecting Dzus ......... pn 58218-73500
    with wing head self ejecting Dzus ....................... pn 58218-73501
Driver exit assist bars
Exit assist bars.jpg (14581 bytes)
Prebent and you trim to fit chassis. Install level with top edge of windscreen
(pair) pn 58055-00001

Altered body front mount details.
Altered front body mount.jpg (7017 bytes)
Altered body front mount. The flange is molded in the body from the mold. The steel mounting plate bolts to the engine plate and the Dzus fasteners attach the body to the mounting plate.

Altered front body mount on the engine plate.jpg (10762 bytes)
Altered front body mount plate. Attaches to engine plate and fitted with Dzus fastener holes to hold the front of the body to the car.

Altered body rear hinge mount details.
Altered rear body mount- full up position.jpg (11869 bytes)
The body in full raise position making it easy to service the clutch and trans inside the car.

Altered rear body mount - full down position.jpg (11693 bytes)
The body all the way down in the race position. The body has no inner wheel arches because the wheels are tucked up under the shoulder hoop and run very close to the seat. This allows us to make the rear track as narrow as possible. The advantages are that the tires are out of the air stream making the car more aerodynamic as well at it makes the car handle better because the rear wheels are closer together making it want to steer the car less. Another advantage is that the diff is narrower which means the diff housing and axles all weigh less.

KLRC altered body hinge details.
wpe51.jpg (6745 bytes)
Hinge rotated forward onto the race position locking the back of the body in place.

Altered rear body mount before attached to the body.jpg (5680 bytes)
Hinge rotated back into the neutral position ready to lift up and back to remove the body from the chassis.

Altered rear body mount.jpg (5791 bytes)
Hinge rotated all the way back into the service position. This locks the body into place to keep it from falling off while you work on the car or tow the car. Without this feature a gust of wind could unlatch the body and allow the body to fall on you while you are working on the clutch or transmission.

Altered rear body mount.jpg (12305 bytes)
Hinge welded together and riveted in place ready to get glassed into the body. This is what it looks like before the rear valance panel is installed in the body to cover all this up. In this photo the body is lowered into race position.

Altered rear body mount.jpg (10539 bytes)
Hinge installed in body with body raised to service position.

Altered rear body mount.jpg (9914 bytes)
Hinge installed in body with body in neutral position ready to lift the body off the chassis.

Complete Hinge Kit PN58305-73180 $ 275.00 AUD (100708)
Includes - 2 ea CNC billet aluminum hinge brackets
Includes - 4 ea CNC steel chassis weld on tabs for aluminum hinge brackets
Includes - 4 ea CNC steel hinge lock plates
Includes - 2 ea steel hinge lock plate bushings
Includes - 1 ea 1" chrom moly axle tube 22" long

Altered body rear slide mount details.

Altered rear body mount - slide type .jpg (8636 bytes)
View of slide mount before rear valance panel in installed. Body is removed by releasing the front Dzus fasteners and sliding the body back 1" then lifting the body up to remove.

Altered rear body mount - slide type.jpg (4033 bytes)
Slide rear body mount chassis tubes.

Altered rear body mount - slide type.jpg (7937 bytes)
Slide rear body mount body bracket and tubes.

Other literature available.
99253-85001 Small Block Chevy components
99253-85002 Big Block Chevy components
99253-85003 Ford 351C engine components
99253-85004 392 Chrysler components
99253-85005 426-440 Chrysler components
99253-53601 Blower Components
99253-80011 Cooling system components
99253-80001 Front Engine Dragster kits
99253-90001 Special Race Car tools
99253-01000 Info on the Drag Race School
99253-00001 Why flow my fuel system ?
99253-00002 How to Win in DYO
99253-00003 So you want to build your own dragster ?
99253-00004 What is the future of DYO ?
99253-00005 KLRC car features
99253-20001 Modified Dragster Prices
99253-30001 Modified Altered Prices
99253-40001 Modified Roadster Prices

99344-00001 Info on your new KLRC car.
99344-00010 Cooling your race car and electric water pump instructions
99344-01001 Supercharged drive hub installation instructions
99344-25950 Instructions for mounting legs on hat injection tool box
99344-26001 Small Block Chevy crank support installation instructions
99344-26002 Big Block Chevy crank support installation instructions
99344-99101 Speed Scoop installations instructions
99344-99201 Big Speed Scoop installations instructions
99344-99301 Pro Stock Scoop installations instructions







Ken Says..... click here






The 31 Chapter 200 page Fuel Injection book is here for  more info on what has been called "the best fuel injection book on this planet". Now only $99.95AUD If you only learn one thing it is worth it
The FI book has been this price for ten years now, my publishing costs continue to rise and soon I will have to raise the price.
Currently all orders are processed at the old price of $99.95 - don't miss out - order now.

I must point out that my printing house (and all the rest of them as well) have raised their prices so when this last printed batch of books are gone... the price goes up. Order now and save.
Can I point out it is less than 50 cents a page!!!

We ship the FI book inside Australia COD Australia Post. When the order arrives at your post office you pay the postman and he sends the money to us. Outside Australia we require a valid credit card to make the charges to.















































"Ken Lowe Race Cars
Flowed Enderle
Flowed Hilborn fuel systems
Drag Race School
Center steer drag race chassis hardware
Centre steer drag race chassis hardware
Specialty engine components
Ken, Lowe
Race, Cars
Drag Race Cars
Fuel, systems
Constant Flow Fuel Systems
Fuel injection
Drag School
Chevrolet Big Block
Chevrolet Small Block
Hemi Wedge
Top Alcohol
 Methanol Nitro Nitromethane
Surfers, Paradise, Australia
Gold, Coast, Oxenford,
Willowbank Raceway
fiberglass, carbon, Kevlar
supercharger, blower, drive,
crank, support, girdle, valve, covers
 timing, cover, offset, magneto, belt
intake, manifold, pump, cam, floater
hubs, axles, coupler, wing, strut,
Goodyear, Romac, Yella Terra, Crow
Crankshaft, MSD Castrol, Powerglide
PSI,TAFC, TAD, data, logger, piston, rings, rods
supercharged drag racing
heads up drag racing
stage volume control
fully adjustable barrel valve
fully adjustable metering valve
Main jet
dash 3 hose
nozzle line
skid pad
Skid pad mounting
Chassis tabs
Weld on tabs
Heim joints
Hiem joints
Rod ends
Chrom moly
TIG welding
JESEL pump drive
JESEL fuel pump drive
Chevy JESEL fuel pump drive
FORD JESEL fuel pump drive
FORD Crank Support
351 Front Crank Support
350 Front Crank Support
427 Front Crank Support
Crank Bearing Supports

MSD ignition leads
MSD spark plug wires
MSD mag drive
Supermag drive
Queensland Ignition Leads
Fuel Injection Hoses
Dash three hose
Dash 3 hose